CatalogProducts for aviation
Версия для печати
Designation: SPK-3

The SPK-3 special hydraulic wheel-mounted crane with telescope boom is intended for installation and removal of gearbox, engines, main and tail rotor hub, blades, special truss, tail rotor and other units (provided their weight and overall dimensions comply with specifications of crane).
Main technical characteristics

Air temperature, °C -50…+50
Allowable wind speed, at a height of 10m, m/sin operating condition – 14
in non-operating condition - 40


Frame structurelongitudinal beam and 2 crossbeams
Bracing jacksmanual control


Drive  hydraulic motor
Type of turning mechanismtooth gear
Angle of rotationnx360°


Number of sections 3
Boom lifting/loweringhydraulic cylinder (ram)
Extension of boom sectionsmanual
Cargo winch drive   hydraulic motor


Type   open
Pump drivegasoline engine
Emergency drivemanual pump
Hydraulic tank capacity, l16


Type of controlhydraulic


Type   hydraulic system safety valve


Maximum load moment, t x m2.83
Lifting capacity, minimum, t:
- at minimum crane radius0.99
- at maximum crane radius0.195
Boom outreach, m (boom length 7.3m):
- minimum2.425
- maximum7.1
Maximum height of crane hook lifting, m7.20
Maximum speed of hook lifting-lowering, m/min4.5
Speed of lowering, m/min, maximum0.4
Rotation frequency, rpm0.2 – 3.0
Time of total derricking, s:
- from maximum to minimum18
- from minimum to maximum22


Length, mm3810
Width, mm1880
Height, mm 1110
Total weight of crane, kg, maximum950

Back to the section
About products

On September 17, 2015, a change was made to the name of the Vysota limited liability company. From that day, the enterprise is referred to as the Kazan Aggregate Plant Limited Liability Company (Kazan Aggregate Plant LLC). The remaining information about the company (BIN, TIN, address, bank details, etc.) remained the same. Such a change of name is not a reorganization, and therefore does not entail any legal consequences, except for the actual change of the name.

Activities of Kazan Aggregate Plant LLC: Development, testing and manufacturing of aircraft rescue equipment for evacuation and emergency medical care, as well as new modern ground support equipment for aircraft and equipment of helicopters.

LLC Kazan Aggregate Plant is certified in accordance with the requirements of GOST RV15.002-2003 and GOST R ISO 9001-2008, has a certificate of conformity №ВР 02.1.4486-2011, a license in accordance with EKPS codes 1520, 1560, 1615, 1620, 1650, 1660, 1670, 1680, 1730, 1740, 2995, 4920, 6530, 6555, 7650:

№ 13629-АТ dated October 23, 2015 - for the development, production, testing and repair of aviation equipment.

Our company is ready to consider proposals for the development and manufacture of specialized equipment for aviation and any other subject.

General Director - Mushtakov George Glebovich
© 2018 LLC “Kazan aggregate plant”. Copying materials from the site is strictly prohibited. Privacy policy