Production
Версия для печати
Designation: ПЗ-01.00.000

Purpose
This unit is intended for pressure servicing of helicopter hydraulic systems, Mi-8MTV helicopter cargo ramp hydraulic system, as well as for draining operating fluid from helicopter hydraulic systems, cargo ramp hydraulic system and air removal from cargo ramp hydraulic system.
Main technical characteristics

1

Operating fluid

AMГ 10 ГОСТ 6794-75 Standard

2

Type of pump

Manual

3

Maximum pressure, MPa

1.55

4

Fineness of filtration

Nominal, mm

Absolute, mm

 

5

8

5

Volume of fluid to be pumped into the unit tank, l

1.8 maximum

6

Volume of fluid to be pumped into the helicopter hydraulic system

13 l maximum

7

Filling station capacity for 10 cycles (double strokes) at pumping rate equal to 1 cycle per second, l/min, minimum

0.27

8

Overall dimensions (length x width x height), mm

420 x 265 x 350

9

Weight, kg, maximum

13

 

Design of unit could be modified without respective modification of technical documentation in case such modification doesn’t result in degradation of technical characteristics and unit serviceability. Please, specify characteristics when ordering unit.




Back to the section
About products

On September 17, 2015, a change was made to the name of the Vysota limited liability company. From that day, the enterprise is referred to as the Kazan Aggregate Plant Limited Liability Company (Kazan Aggregate Plant LLC). The remaining information about the company (BIN, TIN, address, bank details, etc.) remained the same. Such a change of name is not a reorganization, and therefore does not entail any legal consequences, except for the actual change of the name.

Activities of Kazan Aggregate Plant LLC: Development, testing and manufacturing of aircraft rescue equipment for evacuation and emergency medical care, as well as new modern ground support equipment for aircraft and equipment of helicopters.

LLC Kazan Aggregate Plant is certified in accordance with the requirements of GOST RV15.002-2003 and GOST R ISO 9001-2008, has a certificate of conformity №ВР 02.1.4486-2011, a license in accordance with EKPS codes 1520, 1560, 1615, 1620, 1650, 1660, 1670, 1680, 1730, 1740, 2995, 4920, 6530, 6555, 7650:

№ 13629-АТ dated October 23, 2015 - for the development, production, testing and repair of aviation equipment.

Our company is ready to consider proposals for the development and manufacture of specialized equipment for aviation and any other subject.

General Director - Mushtakov George Glebovich
© 2018 LLC “Kazan aggregate plant”. Copying materials from the site is strictly prohibited. Privacy policy