Special traveling crane

Production

Download: Catalog KAZ ground equipment Download: Medical modules catalog

Catalog Products for aviationMi-8MT(Mi-17)

Designation: SPK-3

Purpose
The SPK-3 special hydraulic wheel-mounted crane with telescope boom is intended for installation and removal of gearbox, engines, main and tail rotor hub, blades, special truss, tail rotor and other units (provided their weight and overall dimensions comply with specifications of crane).
Main technical characteristics

Air temperature, °C	-50…+50
Allowable wind speed, at a height of 10m, m/s	in operating condition – 14 in non-operating condition - 40
CRANE TROLLEY
Frame structure	longitudinal beam and 2 crossbeams
Bracing jacks	manual control
TURNING MECHANISM
Drive	hydraulic motor
Type of turning mechanism	tooth gear
Angle of rotation	nx360°
BOOM
Design	telescopic
Number of sections	3
Boom lifting/lowering	hydraulic cylinder (ram)
Extension of boom sections	manual
Cargo winch drive	hydraulic motor
HYDRAULIC SYSTEM
Type	open
Pump drive	gasoline engine
Emergency drive	manual pump
Hydraulic tank capacity, l	16
CONTROL
Type of control	hydraulic
SAFETY SYSTEM
Type	hydraulic system safety valve
OPERATING PARAMETERS
Maximum load moment, t x m	2.83
Lifting capacity, minimum, t:
- at minimum crane radius	0.99
- at maximum crane radius	0.195
Boom outreach, m (boom length 7.3m):
- minimum	2.425
- maximum	7.1
Maximum height of crane hook lifting, m	7.20
Maximum speed of hook lifting-lowering, m/min	4.5
Speed of lowering, m/min, maximum	0.4
Rotation frequency, rpm	0.2 – 3.0
Time of total derricking, s:
- from maximum to minimum	18
- from minimum to maximum	22
TRANSPORTATION DIMENSIONS
Length, mm	3810
Width, mm	1880
Height, mm	1110
Total weight of crane, kg, maximum	950

Back to the section

About products

On September 17, 2015, a change was made to the name of the Vysota limited liability company. From that day, the enterprise is referred to as the Kazan Aggregate Plant Limited Liability Company (Kazan Aggregate Plant LLC). The remaining information about the company (BIN, TIN, address, bank details, etc.) remained the same. Such a change of name is not a reorganization, and therefore does not entail any legal consequences, except for the actual change of the name.

Activities of Kazan Aggregate Plant LLC: Development, testing and manufacturing of aircraft rescue equipment for evacuation and emergency medical care, as well as new modern ground support equipment for aircraft and equipment of helicopters.

LLC Kazan Aggregate Plant is certified in accordance with the requirements of GOST RV15.002-2003 and GOST R ISO 9001-2008, has a certificate of conformity №ВР 02.1.4486-2011, a license in accordance with EKPS codes 1520, 1560, 1615, 1620, 1650, 1660, 1670, 1680, 1730, 1740, 2995, 4920, 6530, 6555, 7650:

№ 13629-АТ dated October 23, 2015 - for the development, production, testing and repair of aviation equipment.

Our company is ready to consider proposals for the development and manufacture of specialized equipment for aviation and any other subject.

General Director - Mushtakov George Glebovich